clear ipv6 pim rp-map
Clears the entries in an IPv6 PIM Sparse static multicast forwarding table, allowing
a new rendezvous point (RP) configuration to be effective immediately.
Parameters
Modes
Privileged EXEC mode
Usage Guidelines
Configuring this command clears and overwrites the static RP configuration. If you
change the static RP configuration, the entries in the IPv6 PIM Sparse multicast forwarding
table continue to use the old RP configuration until they are aged out. You can configure
the
clear ipv6 pim rp-map command to update the entries in the static multicast forwarding table immediately
after making RP configuration changes.
This command is meant to be used with the
rp-address command.