`copy scp running-config`

Downloads a copy of the running configuration file from an SCP server to an ICX device.

Syntax

copy scp
                  					running-config

{ ipv4-address | ipv4-hostname | ipv6 { ipv6-address | ipv6-hostname } [ remote-port ] remote-filename

Parameters

ipv4-address: Specifies the IPV4 address of the SCP server.
ipv4-hostname: Specifies the IP hostname of the SCP server.
ipv6: Specifies the IPV6 address method for SCP file transfer.
ipv6-address-prefix: Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
ipv6-hostname: Specifies the IPv6 hostname of the SCP server.
remote-port: Specifies the remote port number for the TCP connection.
remote-filename: Specifies the name of the file in the SCP server that is be transferred. You can specify up to 127 characters for the filename.

Modes

Privileged EXEC mode

Usage Guidelines

You are prompted for username and password when you configure this command.

Examples

The following example downloads a copy of the running configuration file from an SCP server to an ICX device:

device# copy scp running-config 172.26.51.180 abc.cfg

History

Release version	Command history
08.0.20	This command was introduced.
09.0.00	This command was modified. The following parameters were deprecated: outgoing-interface, public-key, and overwrite.

copy scp running-config