copy scp startup-config

Downloads a copy of the startup configuration file from an SCP server to an ICX device.
Syntax
copy scp startup-config { ipv4-address | ipv4-hostname | ipv6 { ipv6-address | ipv6-hostname } [ remote-port ] remote-filename
Parameters
ipv4-address
Specifies the IPV4 address of the SCP server, using 8-bit values in dotted decimal notation.
ipv4-hostname
Specifies the IP hostname of the SCP server.
ipv6
Specifies the IPV6 address method for SCP file transfer.
ipv6-address
Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
ipv6-hostname
Specifies the IPv6 hostname of the SCP server.
remote-port
Specifies the remote port number for the TCP connection.
remote-filename
Specifies the name of the file in the SCP server that is be transferred. You can specify up to 127 characters for the filename.
Modes

Privileged EXEC mode

Usage Guidelines

You are prompted for username and password when you configure this command.

Examples

The following example downloads a copy of the startup configuration file from an SCP server to an ICX device: 

device# copy scp startup-config 10.198.137.141 startup.txt
 
 Login:tjones
 
 Password:
Parameter Validation Successful
Startup Config Download started
....Startup Config Download Done
Startup Config Write Done
Startup Config Download Complete
History
Release version Command history
08.0.20 This command was introduced.
09.0.00 This command was modified. The following parameters were deprecated: outgoing-interface and public-key.
Parent topic: Commands C