client-interface

Configures the physical port or static LAG port as the Cluster Client Edge Port (CCEP).
Syntax
client-interface { ethernet unit/slot/port | lag lag-id }
no client-interface { ethernet unit/slot/port | lag lag-id }
Command Default

A port is not configured as the CCEP.

Parameters
ethernet unit/slot/port
Configures the specified Ethernet port as the client CCEP.
lag lag-id
Configures the specified LAG as the client CCEP.
Modes

Cluster configuration mode

Cluster client configuration mode

Usage Guidelines

The no form of the command removes the port as the CCEP.

Examples

The following example shows how to configure a port as the CCEP. 

device(config)# cluster SX 400
device(config-cluster-SX)# client 1
device(config-cluster-SX-client-1)# client-interface ethernet 1/1/5
device(config-cluster-SX-client-1)# deploy
Parent topic: Commands C