`copy startup-config scp`

Uploads a copy of the startup configuration file from a FastIron device to an SCP server.

Syntax

copy
                  					startup-config scp

{ ipv4-address | ipv4-hostname | ipv6 { ipv6-address | ipv6-hostname }remote-filename

Parameters

ipv4-address: Specifies the IPV4 address of the SCP server, using 8-bit values in dotted decimal notation.
ipv4-hostname: Specifies the IP hostname of the SCP server.
ipv6: Specifies the IPV6 address method for SCP file transfer.
ipv6-address-prefix/prefix-length: Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
ipv6-hostname: Specifies the IPv6 hostname of the SCP server.
remote-filename: Specifies the name of the file in the SCP server that is be transferred. You can specify up to 127 characters for the filename.

Modes

Privileged EXEC mode

Usage Guidelines

You are prompted for username and password when you configure this command.

Examples

The following example uploads a copy of the startup configuration file from an ICX device to the SCP server with the IP address 10.198.137.141.

device# copy startup-config scp 10.198.137.141 startup.txt 

 Login:tjones

 Password:
Parameter Validation Successful
....File Upload Complete

History

Release version	Command history
08.0.20	This command was introduced.
09.0.00	This command was modified. The following parameters were deprecated: outgoing-interface, public-key, and remote-port.

copy startup-config scp