copy scp client-certificate

Downloads a copy of the client RSA certificate from an SCP server to the ICX device.

Syntax

copy scp
                  client-certificate

{ scp-hostname | ip-address [ remote-port ] | ipv6 { ipv6-hostname | ipv6-address } } { source-filename }

Parameters

scp-hostname: Specifies the hostname of the SCP host.
ip-address: Specifies the IPv4 address of the SCP host (in the form A.B.C.D).
ipv6 { ipv6-hostname | ipv6-address }: Specifies the IPv6 hostname or IPv6 address of the SCP host.
remote-port: Specifies the remote port number. Valid decimal value is 1 through 65535.
source-filename: Specifies the filename to be copied from the SCP host.

Modes

Privileged EXEC Mode

Examples

The following example downloads a copy of the client certificate named clientcert from the server scphost1.

device# copy scp client-cerificate scphost1 clientcert

The following example downloads a copy of the client certificate clientcert from the SCP host server with the IPv6 address shown.

device# copy scp client-certificate ipv6 2001:DB8::300 clientcert

History

Release version	Command history
09.0.00	This command was introduced.