`clear webauth vlan`

Clears the authenticated hosts or the blocked hosts.

Syntax

clear webauth vlan

vlan-id { authenticated-mac | block-mac } [ mac-address ]

Parameters

vlan-id: Specifies the VLAN ID.
authenticated-mac: Clears authenticated hosts in a Web Authentication VLAN. If a MAC address is specified, then only that host is cleared. If a MAC address is not specified, then all the authenticated hosts are cleared.
block-mac: Clears the configured time duration users must wait before the next cycle of Web Authentication attempts is allowed. If a MAC address is specified, then only that host is unblocked. If no MAC address is specified, then all the hosts are unblocked.
mac-address: Specifies the MAC address of the host. When used with authenticated-mac keyword, this is the dynamically authenticated host MAC address and when used with the block-mac keyword, this is the blocked host MAC address.

Modes

Privileged EXEC mode

Examples

The following example clears all the authenticated hosts.

device# clear webauth vlan 10 authenticated-mac

The following example clears the host with MAC address 1111.2222.3333.

device# clear webauth vlan 10 authenticated-mac 1111.2222.3333

The following example unblocks an authenticated host.

device# clear webauth vlan 20 block-mac 1111.2222.3333

clear webauth vlan