copy startup-config https

Uploads a copy of the startup configuration file from a FastIron device to an HTTPS server.
Syntax
copy startup-config https { fqdn-name | ip-address } file-name [ port port-num ]
Parameters
fqdn-name
Specifies the fully qualified domain name (FQDN) of the server.
ip-address
Specifies an IP address.
file-name
Specifies the file name.
port port-num
Specifies the HTTPS server port. Valid values range from 1 through 65535. If no port number is specified, the default is 443.
Modes

Privileged EXEC mode

Usage Guidelines

If no startup configuration is present on the flash, an error message appears and HTTPS upload does not occur.

Examples

The following example uploads a copy of the startup configuration file from a device to the HTTPS server. Because no port is specified, the default of 443 is used. 

device# copy startup-config https 10.1.1.1 backup/icx.cfg
History
Release version Command history
08.0.80 This command was introduced.
Parent topic: Commands C