copy scp license
Downloads a copy of the license file from an SCP server to the FastIron device.
Syntax
copy scp license
{
ipv4-address-
|
ipv4-hostname-
|
ipv6
{
ipv6-address-
|
ipv6-hostname-
}
outgoing-interface
{
ethernet
stackid/slot/port
|
ve
ve-number
}
}
[
public-key
{
dsa
|
rsa
}
]
[
remote-port
]
remote-filename
[
unit
unit-id
]
Parameters
- ipv4-address-
- Specifies the IPV4 address of the SCP server, using 8-bit values in dotted decimal notation.
- ipv6-address-prefix/prefix-length
- Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
- public-key
- Specifies the type of public key authentication to use for the connection, either digital signature algorithm (DSA) or Rivest, Shamir, and Adelman (RSA) . If you do not configure this parameter, the default authentication type is password.
- remote-filename
- Specifies the name of the file in the SCP server that is be transferred. You can specify up to 127 characters for the filename.
Modes
Privileged EXEC mode
Usage Guidelines
You are prompted for username and password when you configure this command.
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced. |