The web interface displays the table and its corresponding graph
chart. The two representations are synchronized and controlled by the search criteria.
For
performance reasons, total counters per DP or per AP for each bin may be pre-calculated.
To view the SoftGRE IPsec Tunnel Statistics:
- elect . The Ruckus GRE tab appears by default.
- Select SoftGRE + IPsec. Update the parameters as explained in SoftGRE + IPsec Report
Parameters.
- Click:
- Load Data— To
view the report in the workspace.
- Export CSV—To
open or save the report in CSV file format.
SoftGRE + IPsec Report
Parameters
| Field |
Description |
Your Action |
| Time
Period |
Indicate the time period for which you want
to view the report. |
Move the slider to set the duration. |
| Zone
Name |
Specifies the zone for which you want to
view the report. |
Select the required zone. |
| Gateway
Address |
Specifies the gateway address |
Enter the gateway address. |
| AP MAC or
IP Address |
Indicates the MAC of the Access Point or IP
Address. |
Enter the AP MAC or IP address. |
SoftGRE + IPsecReport
Attributes contains the report based on the statistics for access
point IPsec. Each entry contains the 15 minutes cumulative data.
SoftGRE + IPsecReport
Attributes
| Attribute |
Type |
Description |
| Time |
Long |
Bin ID, which is stamped at a 15 minute interval.
For example, 10:00, 10:15. |
| TXBytes |
Long |
Indicates the number of bytes sent. |
| RXBytes |
Long |
Indicates the number of bytes received. |
| TXPkts |
Long |
Indicates the number of packets sent. |
| RXPkts |
Long |
Indicates the number of packets received. |
| TX
Dropped Packets |
Long |
Indicates the number of packets dropped. |
| RX
Dropped Packets |
Long |
Indicates the number of packets dropped. |