Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS SmartZone (ST-GA) Tunnel and Data Plane Guide, 7.0.0 800-73598-001 Rev C

  • Preface
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • 4 About This Guide
    • 4.1 About This Guide
    • 4.2 New In This Document
  • Introduction to the SmartZone Data Plane
    • 5 Configuring the Data Plane
      • 5.1 Configuring the Data Plane
  • 6 Creating a DP Group
    • 6.1 Creating a DP Group
  • Flexi-VPN
    • 7 Enabling Flexi VPN
      • 7.1 Enabling Flexi VPN
  • L3 Roaming
    • 8 Enabling L3 Roaming Criteria for DP
      • 8.1 Enabling L3 Roaming Criteria for DP
  • AP and DP Tunnel Stats
    • 9 RUCKUS AP Tunnel Stats
      • 9.1 Viewing Statistics for RUCKUS GRE Tunnels
      • 9.2 Viewing Statistics for SoftGRE Tunnels
      • 9.3 Viewing Statistics for SoftGRE IPsec Tunnels
    • 10 Core Network Tunnel Stats
      • 10.1 Viewing Statistics for the L2oGRE Core Network Tunnel
      • 10.2 Viewing Statistics for the GTP Core Network Tunnel
  • Working with Tunnel Profiles
    • 11 Working with Tunnels and Ports
      • 11.1 Creating a RUCKUS GRE Profile
      • 11.2 Creating a Soft GRE Profile
      • 11.3 Creating an IPsec Profile
      • 11.4 Creating a Tunnel DiffServ Profile
      • 11.5 Applying Communications Assistance for Law Enforcement Act
      • 11.6 Enabling Tunnel Encryption
      • 11.7 Forwarding Multicast Packets
      • 11.8 Split Tunnel Profile
        • 11.8.1 Creating a Split Tunnel Profile
      • 11.9 Managing Core Network Tunnels
        • 11.9.1 Creating Bridge Forwarding Profiles
        • 11.9.2 Creating L2oGRE Forwarding Profiles
      • 11.10 SoftGRE Support
        • 11.10.1 Overview of SoftGRE Support
        • 11.10.2 Configuring And Monitoring AP Zones
        • 11.10.3 SoftGRE SNMP MIBs
        • 11.10.4 SoftGRE Events and Alarms
          • 11.10.4.1 SoftGRE Alarms
          • 11.10.4.2 SoftGRE Events
  • Multiple Tunnel Support
    • 12 Multi Tunnel Support
      • 12.1 Multi-Tunnel Support for Access Points
        • 12.1.1 Configuring Multiple Tunnels for Zone Templates
        • 12.1.2 Configuring Multiple Tunnels for Zone
        • 12.1.3 Configuring Multiple Tunnels in WLANs
  • 13 Data Plane Upgrade
    • 13.1 Upgrading the Data Plane

Core Network Tunnel Stats

In this section:

  1. Viewing Statistics for the L2oGRE Core Network Tunnel
    An L2oGRE forwarding profile defines the gateway and tunnel configuration for the core network of L2oGRE tunnels.
  2. Viewing Statistics for the GTP Core Network Tunnel
    GPRS Tunneling Protocol (GTP) transmits user data packets and signals between the controller and the gateway GPRS support node (GGSN).You can view historical traffic statistics and trends of the GTP core tunnels.

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback