GPRS Tunneling Protocol (GTP) transmits
user data packets and signals between the controller and the gateway GPRS support
node
(GGSN).You can view historical traffic statistics and trends of the GTP core tunnels.
GTP encapsulates traffic and creates GTP tunnels,
which act as virtual data channels for transmission of data between the controller
and
the GGSN. A GTP tunnel is established between the controller and the GGSN for a
data
session initiated from the user equipment (UE).
Complete the following steps to view the GTP core
network tunnel statistics.
- From the main menu, go to . The SoftGRE dialog box is displayed.
- Select GTP and configure the
following options:
- Time Period: Move
the slider to set the duration for which you want to view the report.
- Zone Name: Select
the zone name.
- Gateway IP
Address: Enter the gateway IP address.
- AP MAC or IP
Address: Enter the AP MAC address or IP address.
- Click Load Data to view the
report in the workspace or Export CSV to open or save the report in CSV file format.
The below table lists the attributes based on the
statistics for the GTP. Each entry contains the cumulative data for the
15-minute interval.
GTP Report Attributes
| Attribute |
Type |
Description |
| Time |
Long |
Bin ID, which is stamped at 15-minute intervals; for
example, 10:00, 10:15, 10:30. |
| TX
Bytes |
Long |
Indicates the number of bytes sent. |
| RX
Bytes |
Long |
Indicates the number of bytes received. |
| TX
Packets |
Long |
Indicates the number of packets sent. |
| RX
Packets |
Long |
Indicates the number of packets received. |
| Tx
Dropped Packets |
Long |
Indicates the number of packets dropped while
sending. |
| Rx
Dropped Packets |
Long |
Indicates the number of packets dropped while
receiving. |
| Bad
GTPU |
Long |
Indicates a tunneling mechanism that provides a
service for carrying user data packets dropped. |
| RX
TEID Invalid |
Long |
Indicates the number of invalid packets received by
Tunnel End Point Identifiers (TEID). |
| TX
TEID Invalid |
Long |
Indicates the number of invalid packets sent by the
Tunnel End Point Identifiers (TEID). |
| Echo RX |
Long |
Indicates the echo message received. |
| Last Echo RX Time |
Long |
Indicates the time when the last echo message was
received. |