System-Max Changes and uRPF
The following tables describe the system-max values with and without uRPF configured
on the device. Note that the values with uRPF configuration after reload are reduced
by half.
Note: For ICX 7550 and ICX 7850,
values for IP routes and IPv6 routes are used from the forwarding profile and there
is
no option to change these values. When a new profile is selected, the values from
the
new profile are applied. Refer to the
forwarding-profile command
in the RUCKUS FastIron Command Reference and the "Configuration Fundamentals"
chapter in the RUCKUS FastIron Management
Configuration Guide for more information. ICX 7650 system-max Values Without uRPF Configuration
| System Parameter | Default | Maximum | Current | Configured |
|---|---|---|---|---|
| ip-route | 98304 | 131072 | 98304 | 98304 |
| ip6-route | 5120 | 7168 | 5120 | 5120 |
| ip-route-default-vrf | 65536 | 131072 | 65536 | 65536 |
| ip6-route-default-vrf | 2048 | 7168 | 2048 | 2048 |
| ip-route-vrf | 4096 | 131072 | 4096 | 4096 |
| ip6-route-vrf | 1024 | 7168 | 1024 | 1024 |