Enabling Micro-BFD Globally

Micro-BFD can be enabled globally. The following task enables micro-BFD globally.

To configure micro-BFD, all LAG member links must be directly connected between two session endpoints.

Note: Enabling micro- bfd causes multi-hop BFD support to be disabled.

Enter the configure terminal command to access global configuration mode.
```
device# configure terminal
```

Enter the micro-bfd-enable command to enable micro-BFD at a global level.
```
device(config)# micro-bfd-enable
```

The following example enables micro-BFD at a global level.

device# configure terminal
device(config)# micro-bfd-enable

For detailed configuration examples that include micro-BFD configurations, refer to BFD Configuration Examples.

After performing this task, you must restart the device for micro-BFD to become effective at a global level.