Note: ICX 7150
and ICX 8100 devices do not support tunnels.
To configure an IP static route with a tunnel as the next hop, follow these steps.
Enter global configuration mode.
device# configure terminal
Configure the destination IP address, followed by the prefix length or address mask.
On the same command line, enter the keyword
tunnel followed by the tunnel ID.
device(config)# ip route 10.128.2.71 255.255.255.0 tunnel 4
The following example configures an IP static route with a destination address of
10.128.2.71, a network mask of 255.255.255.0, and a tunnel gateway (tunnel 4) as the
next hop.
device# configure terminal
device(config)# ip route 10.128.2.71 255.255.255.0 tunnel 4