Displaying and Clearing VRRP-Ev3 Statistics

Several show commands can display statistical information about IPv6 VRRP-Ev3 configurations. To reset the IPv6 VRRP-Ev3 statistics, there is a CLI command.

Before displaying statistics, VRRP-Ev3 must be configured and enabled in your network to generate traffic.

Use one or more of the following commands to display VRRP-Ev3 information. The commands do not have to be entered in this order.
  1. Enter the show ipv6 vrrp-extended brief command to display VRRP-Ev3 summary information. 
    device> show ipv6 vrrp-extended brief
Total number of VRRP-Extended routers defined: 1
Short-Path-Fwd Codes - ER: Enabled with revertible option, RT: reverted, NR: not reverted
Interface     VRID CurPri P State  Master addr     Backup addr     VIP            Short-Path-Fwd
v10           1    100    P Master Master addr: Local
                                   Backup addr: fe80::c2c5:20ff:fe7e:f442
                                   VIP        : fd4b::99
                                                                                  Enabled
  2. Enter the show ipv6 vrrp-extended vrid 1 command to display detailed IPv6 VRRP-E configuration information about VRID 1. 
    device> show ipv6 vrrp-extended vrid 1
 VRID 1
Interface ve 10
  state master
  administrative-status enabled
  priority 100
  current priority 100
  backup-hello-interval 60 sec
  hello-interval 1000 msec
  dead-interval 0 msec
  current dead-interval 3600 msec
  preempt-mode true
  accept-mode disabled
  virtual ipv6 address fd4b::99
  virtual mac address 02e0.5216.1d04
  advertise backup: enabled
  next hello sent in 00:00:00.1
  backup router fe80::c2c5:20ff:fe7e:f442 expires in 00:03:00.0
  short-path-forwarding enabled
  activate-backup: disabled
  3. Enter the clear ipv6 vrrp-extended statistics command to reset the statistical counters for an IPv6 VRRP-Ev3 session. 
    device# clear ipv6 vrrp-extended statistics
Parent topic: VRRPv3