Enabling ICMP Redirect Messages

You can enable and disable IPv4 ICMP redirect messages globally or on individual Virtual Ethernet (VE) interfaces but not on individual physical interfaces.
By default, IP ICMP redirect globally is disabled and a RUCKUS Layer 3 device does not send an ICMP redirect message to the source of a misdirected packet, but it does forward the packet to the appropriate router. To enable ICMP redirect messages globally, enter the following commands.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Enable ICMP redirect messages globally. 
    device(config)# ip icmp redirect
    ICMP redirect messages are enabled globally for all interfaces.
  3. Disable ICMP redirect messages for a specific virtual interface.
    device(config-vlan-10)# interface ve 10
device(config-vif-10)# no ip redirect
    You can disable ICMP redirect messages on a specific virtual interface, but not on a physical interface.
Parent topic: ICMP