STP Feature Configuration

Spanning Tree Protocol (STP) features extend the operation of standard STP, enabling you to fine-tune standard STP and avoid some of its limitations.

Parameters for the STP features can be configured on RUCKUS Layer 3 Switches using the CLI.

In this section:

  1. Fast Port Span
  2. Fast Uplink Span
  3. STP Configuration Examples
    Configuration examples for Fast Port Span and Fast Uplink Span Port are explained in this section.
  4. 802.1W Rapid Spanning Tree (RSTP)
  5. Single 802.1W Rapid Spanning Tree Protocol (SRSTP)
    By default, each port-based VLAN on a RUCKUS device runs a separate rapid spanning tree, which you can enable or disable on an individual VLAN basis.
  6. Single Spanning Tree (SSTP)
  7. STP per VLAN Group
  8. Spanning Tree Path Cost Support for 802.1D 2004
    Support for the IEEE 802.1D 2004 defined set of spanning tree path costs can be configured globally for high-speed ports.
Parent topic: Spanning Tree Protocol