The following table lists the type of Layer 3 support available with MCT.
Layer 3 Feature Support with MCT
|
Feature
|
Sub-feature
|
Session VLAN VE
|
Member VLAN VE
|
Design Philosophy
|
|
ip
|
access-groupa
|
Yes
|
Yes
|
Only features that are relevant for MCT management are supported on session VLAN
VE.
|
|
|
address
|
Yes
|
Yes
|
|
|
|
arp-age
|
Yes
|
Yes
|
|
|
|
bgp
|
No
|
Yes
|
|
|
|
bootp-gateway
|
Yes
|
Yes
|
|
|
|
directed-broadcast
|
Yes
|
Yes
|
|
|
|
encapsulation
|
Yes
|
Yes
|
|
|
|
follow
|
No
|
No
|
|
|
|
helper-address
|
Yes
|
Yes
|
|
|
|
icmp
|
Yes
|
Yes
|
|
|
|
igmp
|
No
|
No
|
|
|
|
irdp
|
No
|
Yes
|
|
|
|
local-proxy-arp
|
No
|
Yes
|
|
|
|
metric
|
No
|
Yes
|
|
|
|
mtu
|
Yes
|
Yes
|
|
|
|
multicast-boundary
|
No
|
No
|
|
|
|
ospf
|
No
|
Yes
|
|
|
|
pim
|
No
|
No
|
|
|
|
pim-sparse
|
No
|
Yes
|
|
|
|
policy
|
No
|
Yes
|
|
|
|
proxy-arp
|
No
|
Yes
|
|
|
|
redirect
|
No
|
Yes
|
|
|
|
rip
|
No
|
Yes
|
|
|
|
tcp
|
Yes
|
Yes
|
|
|
|
tunnel
|
No
|
Yes
|
|
|
|
use-acl-on-arp
|
Yes
|
Yes
|
|
|
|
vrrp
|
No
|
Yes
|
|
|
|
vrrp-extended
|
No
|
Yes
|
|
| ipv6
|
|
No
|
No
|
IPv6 is not supported for MCT management.
IPv6 is not supported on member VLAN VE.
|
a.) *ICL: The ICL port is added as the default whenever a CCEP is in OIF. The data
traffic received from the ICL port is filtered out by a dynamically programmed egress
filter on the CCEPs.