show config
To display the current system configuration settings, including network addressing, management VLAN, country code, logging, AAA servers, WLAN services, WLAN groups, AP list, SNMP, and ACLs, etc., use the following command:
Syntax Description
Defaults
None.
Example
ruckus# show config
Protocol Mode= IPv4-Only
Device IP Address:
Mode= Manual
IP Address= 192.168.40.100
Netmask= 255.255.255.0
Gateway Address= 192.168.40.1
Primary DNS= 192.168.40.1
Secondary DNS=
Management VLAN:
VLAN ID= 1
Country Code:
Code= United States
Identity:
Name= Ruckus
NTP:
Status= Enabled
Address= ntp.ruckuswireless.com
Log:
Status= Disabled
Address= 192.168.3.10
Facility= local0
Priority= emerg
AP Facility= local0
AP Priority= emerg
Tunnel MTU:
Tunnel MTU= 1500
Bonjour Service:
Status= Disabled
Telnet Server:
Status= Disabled
FTP Server:
Status= Enabled
Anonynous Status= Enabled
FlexMaster:
Status= Disabled
Address=
Interval= 15
AAA:
ID:
1:
Name= Local Database
Type= Local
2:
Name= Guest Accounts
Type= Guest
...
...
ruckus#