ip addr

To set the controller's IP address and netmask, use the following command:

ip addr IP-ADDR NET-MASK

Use a space to separate the IP address and netmask.

Syntax Description

ip addr
Configure the controller’s IP address and netmask
IP-ADDR
Set the controller’s IP address to this value
NET-MASK
Set the controller’s netmask to this value

Defaults

IP address: 192.168.0.2

Subnet mask: 255.255.255.0

Example

ruckus# config
ruckus(config)# system
ruckus(config-sys)# interface
ruckus(config-sys-if)# ip addr 192.168.0.2 255.255.255.0
The command was executed successfully.