model aopp-profile

Configures an Administrator Option Power Profile (AOPP) that controls Access Points (AP) features to meet specific power budgets defined by the IEEE 802.3 PoE standards.
Syntax
model model-number aopp-profile aopp-profile-number
no model model-number aopp-profile aopp-profile-number
Command Default

The AP uses configurations from the existing Power over Ethernet (PoE) table.

  • The R575 AP configures one of the following profiles by default based on the detected 802.3at or 802.3af power source:

    • If the detected power source is 802.3at, AOPP_R575_802.3atC4_01 is configured.

    • If the detected power source is 802.3af, AOPP_R575_802.3afC3_01 is configured.

  • The T670 AP configures one of the following profiles by default based on the detected 802.3bt or 802.3at power source:

    • If the detected power source is 802.3bt, AOPP_T670_802.3btC5_01 is configured.

    • If the detected power source is 802.3at, AOPP_T670_802.3atC4_02 is configured.

Parameters
model

Configures AP group model-specific settings.

model-number

Specifies the AP model name.

aopp-profile

Configures a power optimization profile for the specified AP model.

aopp-profile-number

Specifies the aopp-profile-number.

The following profiles are available for the supported APs:

  • R575 AOPP profiles (enter one of the following):

    • AOPP_R575_802.3atC4_01

      Configures the 802.3at full capacity power supply.

    • AOPP_R575_802.3afC3_01

      • Configures the 802.3af full capacity power supply on the 2.4, 5, and 6 GHz radio bands.

      • Reduces Multiple Input Multiple Output (MIMO) streams on all bands.

      • Disables the Ethernet feature.

    • AOPP_R575_802.3afC3_02

      • Configures the 802.3af full capacity power supply on the 2.4 and 5 GHz radio bands.

      • Disables the 6 GHz radio band.

      • Reduces MIMO streams on the 2.4 GHz radio band.

      • Disables the Ethernet feature.

    • AOPP_R575_802.3afC3_03

      • Configures the 802.3af full capacity power supply on the 2.4 and 5 GHz radio bands.

      • Disables the 6 GHz radio band.

      • Reduces the transmit power on the 2.4 GHz radio band.

      • Disables the Ethernet feature.

  • T670 AOPP profiles (enter one of the following):

    • AOPP_T670_802.3btC5_01

      Configures the 802.3bt full capacity power supply.

    • AOPP_T670_802.3atC4_01

      • Configures the 802.3at full capacity power supply on the 2.4, 5, and 6 GHz radio bands.

      • Reduces MIMO streams on the 2.4 GHz radio band.

      • Disables the Ethernet feature.

      • Disables LEDs.

    • AOPP_T670_802.3atC4_02

      • Configures the 802.3at power supply on the 2.4, 5, and 6 GHz radio bands.

      • Reduces transmit power by 1 to 6 dB across all radio bands.

      • Disables the 1G Ethernet interface and LEDs.

    • AOPP_T670_802.3atC4_03

      • Configures the 802.3at full capacity power supply on the 5 and 6 GHz radio bands.

      • Disables the 2.4 GHz radio band.

    • AOPP_T670_802.3atC4_04

      • Configures the 802.3at full capacity power supply on the 2.4 and 5 GHz radio bands.

      • Disables the 6 GHz radio band.

Modes

AP group configuration mode.

Usage Guidelines

By default, the AP uses configurations from the existing PoE table. This ensures that the AP operates during bootup and power source changes, and maintains backward compatibility in case the selected AOPP profile application fails.

Enter the end or exit command to save the model-specific changes for the AP group.

The no form of the command disables the model-specific AOPP profile configuration and reverts to the default configuration.

Examples

The following example shows how to configure the AOPP profile "AOPP_R575_802.3atC4_01" on the R575 AP.

ruckus# config
ruckus(config)# ap-group System Default
The AP group entry 'System Default' has been loaded. To save the AP group, type 'end' or 'exit'.
ruckus(config-apgrp)# model R575 aopp-profile AOPP_R575_802.3atC4_01
ruckus(config-apgrp)# end
The AP group 'System Default' has been updated.If band scheme or antenna type is changed, the AP will be rebooted.
Your changes have been saved.
ruckus(config)#

The following example shows how to configure the AOPP profile "AOPP_T670_802.3btC5_01" on the T670 AP.

ruckus# config
ruckus(config)# ap-group System Default
The AP group entry 'System Default' has been loaded. To save the AP group, type 'end' or 'exit'.
ruckus(config-apgrp)# model T670 aopp-profile AOPP_T670_802.3btC5_01
ruckus(config-apgrp)# end
The AP group 'System Default' has been updated.If band scheme or antenna type is changed, the AP will be rebooted.
Your changes have been saved.
ruckus(config)#
History
Release version Command history

200.19 MR

This command was introduced.