dot1x
To set the authentication method to '802.1x EAP', use the following command:
dot1x [wpa2| wpa3| wpa23-mixed]algorithm[aes|AES-GCMP-256auth-server[local|name<WORD>]
Command Syntax
dot1x: set auth method to dot1x.
wpa2: set the encryption method to WPA2.
wpa3: set the encryption method to WPA3.
wpa23-mixed: set the encryption method to WPA2/WAP3-Mixed.
algorithm: define the encryption algorithm.
aes: set the encryption algorithm to "AES".
AES-GCMP-256: set the encryption algorithm to "AES-GCMP-256".
auth-server: designate the authentication server.
local: Sets the authentication server to 'Local Database'.
name: Sets the authentication server to the specified name from AAA.
Example
ruckus(config-wlan)# dot1x wpa2 algorithm aes auth-server local The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-wlan)#