reportd

Use the following command to enter the config-reportd context and configure Reportd settings.

reportd

Syntax Description

help
Shows available commands
history
Shows a list of previously run commands
abort
Exits the config-reportd context without saving changes.
end
Save changes, and then exits the config-reportd context.
exit
Save changes, and then exits the config-reportd context.
quit
Exits the config-reportd context without saving changes.
enable
Enable Reportd settings.
disable
Disable Reportd settings.
wlan-url WORD
Set WLAN report URL.
ap-url WORD
Set AP report URL.
client-url WORD
Set client report URL.
system-url WORD
Set system report URL.
wlan-interval NUMBER
Sets WLAN report interval for Reportd in minutes.
ap-interval NUMBER
Sets AP report interval for Reportd in minutes.
client-interval NUMBER
Sets client report interval for Reportd in minutes.
system-interval NUMBER
Sets system report interval for Reportd in minutes.
wlan-compress NUMBER
Sets WLAN report compress-mode for Reportd.
ap-compress NUMBER
Sets AP report compress-mode for Reportd.
client-compress NUMBER
Sets client report compress-mode for Reportd.
system-compress NUMBER
Sets system report compress-mode for Reportd.
show
Displays Reportd settings.

Example

ruckus(config)# reportd
ruckus(config-reportd)# enable
The command was executed successfully. To save the changes, type 'end' or 'exit'   
ruckus(config-reportd)# show
Reportd Settings:
  Reportd Status= Enabled
  WLAN report url=
  AP report url=
  Client report url=
  System report url=
  WLAN report interval= 15 min
  AP report interval= 15 min
  Client report interval= 15 min
  System report interval= 15 min
  WLAN compress mode= 0
  AP compress mode= 0
  Client compress mode= 0 
  System compress mode= 0