Use the following command to configure an AAA server entry and enter the config-aaa
context:
aaa
WORD
Syntax Description
- abort
- Exits the config-aaa context without saving changes.
- end
- Saves changes, and then exits the config-aaa context.
- exit
- Saves changes, and then exits the config-aaa context.
- quit
- Exits the config-aaa context without saving changes.
- name
WORD
- Sets the AAA server name.
- show
- Displays a list of available AAA servers.
- CaseSensitive
- Sets the ‘CaseSentitive’ value of AD/LDAP server to ‘enabled’.
- type
- Sets the type of AAA server.
- type ad
- Sets the AAA server type to 'Active Directory'.
- type ldap
- Sets the AAA server type to 'LDAP'.
- type ad-802.1x
- Sets the AAA server type to 'Active Directory For 802.1x '.
- type radius-auth
- Sets the AAA server type to 'RADIUS'.
- type tacplus-auth
- Sets the AAA server type to 'TACPLUS'.
- type radius-acct
- Sets the AAA server type to 'RADIUS Accounting'.
- radius-encryption
- Sets the AAA server encryption type.
- radius-encryption tls
- Sets the AAA server encryption type to 'TLS'.
- auth-method pap
- Sets the authentication method to PAP.
- auth-method chap
- Sets the authentication method to CHAP.
- ip-addr
IP-ADDR
- Sets the AAA server's IP/IPv6 address.
- port
PORT-NUM
- Sets the AAA server's port.
- tacplus-service
WORD
- Sets TACPLUS service name with length (1-64 bytes).
- domain-name
WORD
- Sets the windows/base domain name.
- domainServer-deviceNameWORD
- Sets the domain server device name.
- no radius-encryption
- Disables the AAA server encryption.
- no ad-global-catalog
- Disables global catalog support.
- no grp-search
- Disables group attribute lookup support.
- no encryption-TLS
- Disable the TLS Encryption
- no backup
- Disables the backup function.
- ad-global-catalog
- Enables global catalog support.
- grp-search
- Enables group attribute lookup support.
- admin-dn
WORD
- Sets the admin domain name.
- admin-password
WORD
- Sets the admin password.
- key-attribute
WORD
- Sets the LDAP key attribute.
- search-filter
WORD
- Sets the LDAP search filter.
- radius-secret
WORD
- Sets the AAA server's shared secret.
- tacplus-secret
WORD
- Sets the TACPLUS server's shared secret.
- encryption-TLS
- Enables the TLS Encryption
- backup
- Enables the backup function.
- backup-ip-addr
IP-ADDR
- Sets the backup AAA server's IP/IPv6 address.
- backup-port
PORT-NUM
- Sets the backup AAA server's port.
- backup-radius-secret
WORD
- Sets the backup AAA server's shared secret.
- request-timeout
NUMBER
- Sets the failover request timeout (2~20 seconds).
- retry-count
NUMBER
- Sets the failover retry count (2~10 times).
- consecutive-drop-packet
NUMBER
- Sets the number of consecutive dropped packet (range:1~10 , default is 1).
- reconnect-primary-interval
NUMBER
- Sets the failover re-connect to primary interval (1~86400 minutes).
Example
ruckus(config)# aaa activedir
The AAA server 'activedir' has been created. To save the AAA server, type 'end' or 'exit'.
ruckus(config-aaa)# type ad
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-aaa)# ip-addr 192.168.10.40
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-aaa)# show
AAA:
ID:
:
Name= activedir
Type= Active Directory
IP Address= 192.168.10.40
Port= 389
Windows Domain Name=
Global Catalog= Disabled
Admin DN=
Admin Password=
Group Search= Enabled
encryption-TLS = Disabled
ruckus(config-aaa)# end
The AAA server 'activedir' has been updated and saved.
Your changes have been saved.
ruckus(config)#