open

To set the authentication method to 'open', use the following command:

200.15 update
open [none|owe|wpa2|wpa3|wpa23-mixed|wpa-mixed] passphrase <WORD> algorithm <WORD>]

Syntax Description

  • none: Sets the authentication method to 'open' and encryption method to 'none'.
  • owe: Sets the authentication method to 'open', encryption method to 'OWE', algorithm to 'AES', and pmf to 'required'.
  • wpa2: Sets the authentication method to 'open' and encryption method to 'WPA2'.
  • wpa3: Sets the authentication method to 'open' and encryption method to 'WPA3'.
  • wpa23-mixed: Sets the encryption method to 'WPA2/WPA3 Mixed'.
  • wpa-mixed: Sets the encryption method to 'WPA/WPA2 Mixed'.
  • AES: Sets the algorithm to AES.
  • auto: Sets the algorithm to auto.

Defaults

None.

Example

ruckus(config)# wlan wlan2
The WLAN service 'wlan2' has been created. To save the WLAN service, type 'end' or 'exit'.
ruckus(config-wlan)# open none
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-wlan)# end
The WLAN service 'wlan2' has been updated and saved.
Your changes have been saved.
ruckus(config)#