radio (AP)
Configures the 2.4, 5, and 6 GHz radio
settings independently on an AP.
Syntax
radio {
2.4
|
5
|
low_5
|
upper_5
|
6
}
[
channelization {
auto
|
number
}]
[channel
{
auto
|
number
}
]
[tx-power
{
auto
|
full
|
min
|
1-10
}]
[wlan-group
group_name
]
[
wlan-service
{
enable
|disable
}
]
[admission-control value
]
[
channel range
number-list
]
[
bss-min-rate
number
]
[
mgmt-tx-rate
number
]
[
afc-enabled
word
]no radio {
2.4
|
5
|
6
}[
channelization {
auto
|
number
}]
[channel
{
auto
|
number
}
]
[tx-power
{
auto
|
full
|
min
|
1-10
}]
[wlan-group
group_name
]
[
wlan-service
{
enable
|disable
}
]
[admission-control value
]
[
channel range
number-list
]
[
bss-min-rate
number
]
[
mgmt-tx-rate
number
]Command Default
The default radio setting values are:
| Parameter | Value |
|---|---|
| channelization | Auto |
| channel | Auto |
| tx-power | Auto |
| wlan-group | Default |
| wlan-service | Enabled |
| wlan-service-override | Disabled |
| tx-power | Auto |
| admission-control | Disabled |
| bss-min-rate | 0 (HE MCS 0) |
| mgmt-tx-rate | 6 Mbps |
| afc-enabled | Disabled by default for indoor APs. Automatically enforced on outdoor APs and cannot be disabled. |
Parameters
- channelization { auto | number }
- AP channel width. For the 2.4 GHz radio, valid values are auto, 20, or 40 MHz. For the 5 GHz radio, valid values are auto, 20, 40, and 80 MHz. For the 6 GHz radio, valid values are auto, 20, 40, 80, 160, and 320 MHz.
- channel { auto | number }
- AP channel. Valid values are auto or a specific channel number. From 1 through 233 for 20 MHz, or from 1 through 229 for 40 MHz, or from 1 through 221 for 80, 160, or 320 MHz channels.
- tx-power { auto | full | min | num 1-10 }
- AP transmit power. Valid values are auto, full, min, or a specific dB value in the range of -1 through -10.
- bss-min-rate number
- Minimum Basic Service Set (BSS) rate on 6 GHz radio. Valid values are 0 (HE MCS 0), 1 (HE MCS 1), 2 (HE MCS 2), and 3 (HE MCS 3).
- mgmt-tx-rate number
- Management transmission rate on 6 GHz radio. Valid values are 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
Modes
AP configuration mode
Usage Guidelines
The 6 GHz radio can be configured only on the tri-band APs.
The no form of the command removes the configured values for the radios, reverting to the default configuration settings.
Examples
The following example configures the 2.4 GHz radio settings globally for all APs.
ruckus(config-ap)# radio 2.4 channelization auto The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-ap)# radio 2.4 channel auto The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-ap)# radio 2.4 wlan-group Default The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-ap)# radio 2.4 wlan-service The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-ap)# radio 2.4 tx-power auto The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-ap)# end The device information has been updated. Your changes have been saved. ruckus(config)#
History