channelfly

To enable ChannelFly channel management, use the following command:

channelfly [ radio-2.4-mtbc | radio-5-mtbc ] NUMBER

Syntax Description

channelfly
Enable ChannelFly automatic adjustment of theAP radio channel
radio-2.4
Enable ChannelFly on the 2.4 GHz radio
radio-5
Enable ChannelFly on the 5 GHz radio
mtbc
Set the mean time between channel changes
NUMBER
Number in minutes (1~1440) to set as mean time between channel change

Defaults

Enabled for both 2.4 and 5 GHz radios

MTBC: 100

Example

Enable ChannelFly channel management for 2.4G radios

ruckus(config-services)# channelfly radio-2.4 100
The command was executed successfully.
ruckus(config-services)#

Enable ChannelFly channel management for 5 G radios

ruckus(config-services)# channelfly radio-2.4-mtbc 100
The command was executed successfully.
ruckus(config-services)#