background-scan

Enables background scanning and configures the scan interval on an AP radio.
Syntax
background-scan {radio-2.4-interval|radio-5-interval|radio-6-interval} number
no background-scan {radio-2.4-interval|radio-5-interval|radio-6-interval} number
Command Default

By default, background scanning is enabled on all radios and the scan interval is set to 300 seconds.

Parameters
number
Background scanning time interval, in seconds. Range is from 1 through 65535.

Syntax Description

Modes

Services configuration mode

Usage Guidelines

The 6 GHz radio can be configured only on the tri-band APs.

The no form of the command removes the configured values for the radios.

Examples

The following example enables background scanning and sets the scan interval for the 2.4 GHz radio settings on an AP.

ruckus(config-services)# background-scan radio-2.4-interval 6
The command was executed successfully.
ruckus(config-services)#
History
Release version Command history
200.16 This command was modified to include the 6 GHz radio setting.