Working with Tunnel Profiles
In this section:
- Configuring the Tunnel UDP PortGRE encapsulation uses IP protocol 47 by default. However, GRE+UDP encapsulation is typically selected when tunneling traffic through NAT devices or in environments where UDP traversal is required for reliable connectivity.
- Forwarding Multicast PacketsThe Multicast Forwarding parameter enables forwarding of multicast packets in Data Plane tunnel mode.
- Creating a RUCKUS GRE ProfileA RUCKUS GRE tunnel profile defines encapsulation of wireless LAN (WLAN) traffic between access points (APs) and the RUCKUS data plane (DP). When applied, the profile determines the tunneling protocol, encryption, and failover behavior, allowing you to control how tunnels are formed.
- Creating a SoftGRE ProfileA SoftGRE tunnel profile enables encapsulation of wireless LAN (WLAN) traffic from access points (APs) to third-party gateway servers using Generic Routing Encapsulation (GRE). When applied, the profile defines gateway addresses, failover behavior, and keep-alive parameters, allowing you to control how AP traffic is routed and maintained in multi-vendor or distributed environments.
- Creating an IPsec ProfileThe IPsec profile enables secure, encrypted tunneling for access points and Data Plane connections using industry-standard protocols. When applied, the profile determines authentication, encryption, and tunnel type assignment, allowing you to control how traffic is protected across the network.
- Creating a Tunnel DiffServ ProfileA Tunnel DiffServ profile defines how Differentiated Services Code Point (DSCP) values are applied to traffic inside RuckusGRE or SoftGRE tunnels. This ensures Quality of Service (QoS) markings are preserved or set for uplink and downlink traffic.
- Split Tunnel ProfileSplit Tunnel improves performance and network efficiency for remote users. It sends only corporate traffic through the Data Plane while allowing local traffic to go directly to its destination. By default, traffic is either switched locally or tunneled, and you can define custom exceptions for the other path. Split tunneling provides the following advantages:
- Managing Core Network TunnelsCore Network Tunnels in SmartZone controllers define how AP traffic is forwarded after tunnel termination.