Enabling L3 Roaming

L3 Roaming enables seamless client mobility across Layer 3 boundaries by preserving client IP addresses and session continuity as clients move between APs connected to different DPs or subnets. The feature dynamically establishes tunnels and manages session tables to maintain uninterrupted connectivity in large, multi-subnet WLAN environments.
Note: L3 Roaming is supported only when 40 or fewer Data Planes are registered in a cluster. The feature requires a valid L3 Roaming license. For licensing details, refer to Tunnel and Data Plane Licenses.
Complete the following steps to enable L3 Roaming from the SmartZone controller web UI.
  1. In the controller web UI, select Network > Data and Control Plane > L3 Roaming.
    The L3 Roaming page is displayed listing all the available DPs to the controller.
  2. Select the DP on which you want to enable L3 Roaming and click Configure.
    The Edit L3 Roaming page is displayed.

    Enabling L3 Roaming

  3. In Activate, select Enable from the drop-down menu to enable L3 Roaming on this DP.
  4. In Roaming Criteria, select one of the following options to define the data format to establish connection between DPs:
    • UE Subnet. Select this option to define roaming boundaries based on the client’s IP subnet. With this option, the system uses the client’s IP address to determine which Data Plane (DP) is the “home” for that client. If a client roams to another AP but keeps the same IP subnet, the system recognizes that the client should remain anchored to the original DP.
    • WLAN VLAN. Select this option to define roaming boundaries based on the WLAN’s VLAN ID. With this option, the system uses the VLAN ID assigned to the client’s WLAN to determine DP assignment and roaming behavior.
      • If a client connects to an AP and is placed on VLAN 5, the system checks which DP is responsible for handling traffic for VLAN 5.
      • If the client roams to another AP—even in a different building—but remains on VLAN 5, the system ensures the client’s traffic is anchored to the DP assigned to VLAN 5.
  5. Click Create to add roaming criteria based on your selection in the Roaming Criteria field:
    • If you selected UE Subnet, enter the subnet in the format IP address with subnet mask (for example, 192.168.100.0/24).
    • If you selected WLAN VLAN, enter the VLAN number. Optionally, enter various VLANs with comma or dashes, for example 3,5-10.
  6. Click OK to save the criterion.
  7. Repeat steps 5 and 6 to add additional UE subnets or WLAN VLANs as needed.
  8. Click OK to save the L3 Roaming configuration to the selected DP.
  9. Click OK to apply the changes to all the DPs in the list.
L3 Roaming is now enabled. Roaming criteria have been configured to determine how Data Planes connect and manage client mobility within the network.
Select the created row and click Cleared by Selected to clear the configured roaming criteria entries.