Tunnel and Data Plane Licenses
Data Plane Licenses
- Support License for Data Plane: Like the Support Licenses for APs and controllers, each Data Plane instance requires a Support License. This license enables software upgrades and assistance from RUCKUS Support for the vSZ-D and SZ144-D platforms.
- Data Plane Capacity License: Onboarding an external Data Plane (vSZ-D or SZ144-D) to function with virtual SmartZone controllers requires one license for each data plane in the controller. By default, you receive 10 data plane capacity licenses for three months. After this period, the data plane instances will enter an error state until you purchase and activate permanent licenses.
- Data Plane DHCP: Enable DHCP
features in the Data Plane after you activate the license. By default, you
receive one DHCP license for 90 days (3 months). Each DHCP license supports
1,000 IP address leases. Assign DP DHCP licenses to the data plane instances
that require these services. Only DP instances with an assigned license can
utilize these features.
To assign DHCP licenses to a DP instance, navigate to . Use the Create option to bind the available licenses to the desired DP instances (the associated DHCP profiles must be created separately) or use the Wizard option to perform both license assignment and profile configuration.
- Note:
- The Create button is grayed out when no licenses are available.
- You can assign one DHCP license to a maximum of two data plane instances that belong to the same DP Group.
- For detailed instructions on creating these profiles, refer to Working with DHCP and NAT.
- Data Plane NAT: Enable NAT
features in the Data Plane after you activate the licenses. By default, you
receive one NAT license for 90 days (3 months). Each NAT license supports
100,000 NAT sessions. Assign DP NAT licenses to the data plane instances that
require these services. Only DP instances with an assigned license can utilize
these features.
To assign NAT licenses to a DP instance, navigate to . Use the Create option to bind the available licenses to the desired DP instances (the associated NAT profiles must be created separately) or use the Wizard option to perform both license assignment and profile configuration.
- Note:
- The Create button is grayed out when no licenses are available.
- You can assign one NAT license to only one DP instance.
- For detailed instructions on creating these profiles, refer to Working with DHCP and NAT.
- Data Plane Bandwidth: By default,
your vSZ-D license provides your Data Plane with 1 Gbps throughput capacity
(bandwidth). The Data Plane bandwidth license increases the uplink bandwidth for
the vSZ-D. You can assign a bandwidth license to an approved data plane. You can
configure each DP with only one bandwidth license. The following licensing
options are available:
- 10 Gbps - Upgrade to this option for a maximum throughput in the uplink of 10 Gbps. This requires a 10 Gbps NIC on your host machine.
- Unlimited - This add-on license includes unlimited throughput capacity in the uplink of the data plane. This requires a 40 Gbps NIC on your host machine.
Attention: Configuring a bandwidth license applies exclusively to virtual platforms.To assign a bandwidth license to your vSZ-D, in the controller web UI select . Select a DP from the list and select the Bandwidth from the drop-down menu. Click OK.
Tunnel Licenses
- SoftGRE Tunnel (AP Direct
Tunnel): SoftGRE enables tunneling of client traffic from access points to a
third‑party gateway using GRE encapsulation. A SoftGRE license is required for
each access point configured for SoftGRE tunneling.
For information about configuring different tunnel profiles, refer to Working with Tunnel Profiles.
Note: SoftGRE Tunnels are distinct from standard RUCKUS GRE Tunnels (no license required) and Split Tunnels (Split Tunnel license required). Assign the license type that matches the configured tunneling behavior in the AP or Zone. - Split Tunnel: Split Tunnel allows
an access point to forward corporate traffic through the GRE tunnel while
locally breaking out non‑corporate traffic to reduce WAN usage and latency. A
Split Tunnel license is required for each access point using this feature.
For information about configuring different tunnel profiles, refer to Working with Tunnel Profiles.
Note: Split Tunnels are distinct from standard RUCKUS GRE Tunnels (no license required) and SoftGRE Tunnels (SoftGRE Tunnel license required). Assign the license type that matches the configured tunneling behavior in the AP or Zone. - Flexi-VPN: By choosing the
network peers towards which APs can form the VPN tunnels, Flexi-VPN allows you
to customize the network topology and is thereby able to control the network
resources accessible to the end-user. Only vSZ-E and vSZ-H support this feature
and it is enabled by purchasing the Flexi-VPN license. By default, you get one
Flexi-VPN trial license for 90 days (about 3 months). Beyond 90 days, purchase
the permanent license to enable the feature in all access points, as necessary
for your deployment.
For information about configuring Flexi-VPN, refer to Enabling Flexi-VPN.
Note: A minimum of two data planes must be present for this feature to function. Activate Flexi-VPN by assigning a Flexi-VPN profile to a WLAN. - L3 Roaming: L3 Roaming preserves
a client’s IP address and session continuity by dynamically creating tunnels
between Data Planes to anchor traffic to the client’s home Data Plane when
roaming across different Layer 3 subnets. By default, you get one L3 Roaming
license for 90 days (about 3 months). Beyond 90 days, purchase the permanent
license.
For information about configuring L3 Roaming, refer to Enabling L3 Roaming.
Note: A minimum of two data planes must be present for this feature to function. One license is required per cluster; for example, if you have six data planes spread across four clusters, you will need four licenses.
Standard Licensing and Default Trial Allocations
Licenses and Usage Scope for Tunneling Features and Data Plane Services
| Feature / License Type | License ID | Usage Scope |
|---|---|---|
| SoftGRE (AP Direct Tunnel) | CAPACITY‑RXGW | One license for each access point configured for SoftGRE tunneling |
| Split Tunnel | CAPACITY‑SPTN | One license for each access point using Split Tunnel |
| Data Plane NAT | CAPACITY‑DP‑SNAT | One license for each Data Plane enabling NAT (supports up to 100,000 NAT sessions per license) |
| Data Plane DHCP | CAPACITY‑DP‑SVDS | One license for each Data Plane enabling DHCP or a maximum two DPs of the same DP group (supports up to 1,000 DHCP leases per license) |
| vSZ‑D Capacity | CAPACITY‑VSZD | One license for each vSZ‑D instance onboarded |
| Flexi‑VPN | FEATURE‑FLEXIVPN | One license for each controller enabling Flexi‑VPN |
| L3 Roaming | FEATURE‑SVL3 | One license for each Data Plane that participates in L3 Roaming |
%20Tunnel%20and%20Data%20Plane%20Guide%207.2.0_v1_GUID-15070FFC-BBD6-4414-96B5-EB859765247F/Tunnel%20and%20DP%20Licenses%20-edited=GUID-5401BC8D-5832-4310-819E-C85BA887B123=1=en-US=Low.png)