Adding Tunnel Profiles to a WLAN

A RUCKUS GRE or SoftGRE tunnel profile configures secure tunneling for wireless traffic through the Data Plane. When applied, the selected tunnel profile determines how WLAN traffic is encapsulated and routed, allowing you to fine-tune traffic handling according to your chosen tunnel settings.
Note: Ensure the tunnel profile is associated with the Zone before assigning it to a WLAN. The selection menu in the WLAN configuration displays only profiles previously assigned to the Zone. For instructions on associating tunnel profiles with a Zone, refer to Associating Multiple Tunnel Profiles with a Zone.
Complete the following steps to assign a tunnel profile to a WLAN in the SmartZone controller.
  1. In the controller web UI, select Network > Wireless > Wireless LANs, select the WLAN and click Configure.
    This displays the Edit WLAN Config: window.
  2. Scroll to the Data Plane Options section and ensure the toggle for Tunnel WLAN traffic through Ruckus GRE is ON.
    Enabling this toggle displays the Data Plane options for the WLAN.
  3. Select the tunnel profile to add to this WLAN. From the GRE Tunnel Profile drop-down menu, select either a RUCKUS GRE or SoftGRE profile.
    Note: Only profiles added to the Zone configuration appear in the list.
  4. Configure additional tunnel profile options. The available options vary depending on the tunnel type selected (RUCKUS GRE or SoftGRE). Configure these settings according to WLAN Data Plane Options.
  5. Click OK to save the changes.
    The WLAN is now associated with the selected tunnel profiles. Wireless traffic is tunneled according to the chosen GRE settings.
Review this configuration by selecting the WLAN and scrolling to the Details section. Click the Configuration tab, then scroll to the Data Plane Options subsection.