Configuring ICX Switches

To allow Unleashed Multi-Site Manager to monitor and manage ICX switches, you must enable software management in the switch and register the device with Unleashed Multi-Site Manager.
  1. Upload the Unleashed license as described in Uploading a License File.
    There are three types of Unleashed Multi-Site Manager licenses files; one for ZoneDirector, one for switch and the other for Unleashed. Ensure you select the correct file.
  2. Enable Unleashed Multi-Site Manager on the switch:
    There are two ways to make an ICX switch aware of the Unleashed Multi-Site Manager's IP address - one is using DHCP option 43, and the other is using manual configuration through ICX commands.
    • Manually configuring the Unleashed Multi-Site Manager IP Address on a switch includes issues the sz active-list <IP address>. Example:
      SSH@Freddy-ICX7150-48PF-Router>enable
      No password has been assigned yet...
      SSH@Freddy-ICX7150-48PF-Router#configure terminal
      SSH@Freddy-ICX7150-48PF-Router(config)#sz active-list 10.223.5.230
      
    • Configuring DHCP to send Unleashed Multi-Site Manager IP addresses to ICX switches using DHCP Option 43, includes the following steps as shown in the example:
      1. Configure DHCP Option 43 on the DHCP server using the RKUS.scg-address to identify the Unleashed Multi-Site Manager IP addresses.

        Unleashed Multi-Site Manager IP addresses are sent with 6 as the sub-option value. The switch ignores all other data in DHCP Option 43 if Unleashed Multi-Site Manager IP addresses are present. Example:

        subnet 192.168.12.0 netmask 255.255.255.0 {
        range 192.168.12.100 192.168.12.199;
        option routers 192.168.12.1;
        option subnet-mask 255.255.255.0;
        option broadcast-address 192.168.12.255;
        option ntp-servers 192.168.11.22;
        class "Ruckus AP" {
        match if option vendor-class-identifier = "Ruckus CPE";
        option vendor-class-identifier "Ruckus CPE";
        default-lease-time 86400;
        vendor-option-space RKUS;
        option RKUS.scg-address "192.168.11.200";
        }
        }
        

  3. You can view the status of the Unleashed Multi-Site Manager connection using the show sz status command.
    Example:
    SSH@Freddy-ICX7150-48PF-Router#show sz status
    
    ============    SZ Agent State Info     ===================
    Config Status: None     Operation Status: Enabled
    State: SZ SSH CONNECTED     Prev State: SZ SSH CONNECTING    Event: NONE        
    
    Active List         : 10.223.5.230
    DHCP Option 43      : No
    DHCP Opt 43 List    : None
    Passive List        : None
    Merged List         : 10.223.5.230
    Merged Idx: 0    IP : 10.223.5.230
    
    SZ IP Used          : 10.223.5.230
    SZ Query Status     :
            Response Received
    
    SSH Tunnel Status - :
      Tunnel Status     : Established
      CLI IP/Port       : 10.223.5.230/40005
      SNMP IP/Port      : 10.223.5.230/30005
      Syslog IP/Port    : 127.0.0.1/6514
    
    Timer Status        : Not Running
    
  4. You can use the sz-disconnect command to disconnect the ICX switch from the current connection with Unleashed Multi-Site Manager, and initiate a new connection based on the currently available list of Unleashed Multi-Site Manager IP addresses.
    Example:
    ICX# sz disconnect
    SZ Disconnect initiated...
    
  5. Login to the Unleashed Multi-Site Manager web interface and go to Devices and to see the ICX switch within the Switch group.