| AI-Driven RRM |
Client Density vs Throughput |
Optimize channel plan for a
high number of clients in a dense network: A high-client-density network
requires low interfering channels which fosters improved throughput, lower latency,
better signal quality, stable connections, enhanced user experience, longer battery
life, efficient spectrum utilization, optimized channel usage, and reduced
congestion, leading to higher data rates, higher SNR, consistent performance, and
balanced network load. |
Leverage AI-Driven RRM Full Optimization mode to assess the neighbor AP radio
channels for each AP radio and build a channel plan for each radio to minimize the
interference. In this mode, while building the channel plan, IntentAI may optionally
change the AP Radio Channel Width and Transmit Power to minimize the channel
interference. IntentAI ensures that only the existing channels configured for this
network are utilized in the channel planning process. |
| Optimize channel plan for
high client throughput in a sparse network: In sparse networks supporting high
client throughput, moderate interference is manageable due to optimized resource
allocation, minimal competition for bandwidth, and strong signal strength. This
allows for stable connections and satisfactory performance, outweighing drawbacks
of
interference. |
Leverage AI-Driven RRM Partial Optimization mode to assess the neighbor AP
channels for each AP radio and build a channel plan for each AP radio to minimize
interference. In this mode, while building the channel plan, IntentAI will not
change the AP Radio Channel Width and Transmit Power. IntentAI ensures that only the
existing channels configured for this network are utilized in the channel planning
process. |
| EquiFlex |
Time to Connect vs. Client Density |
Reduce Management traffic in
a dense network: Use intelligent probe responses to minimize unnecessary
traffic, reducing congestion and improving overall performance by prioritizing
essential communications in environments with many devices. |
Leverage EquiFlex, available only through IntentAI, for intelligent handling of
probe request/response and optimize management traffic in a dense network. For
improved performance, this option will disable the Air Time Decongestion (ATD)
feature if previously enabled for this network. |
| Standard Management traffic
in a sparse network: Maintain regular probe responses to ensure reliable
connectivity and network stability, as the lower device density does not typically
cause congestion or performance issues, allowing for standard management traffic
without adverse effects. |
This option will disable the EquiFlex feature and the network will continue
using the current configuration (if any) for handling probe request/response in the
network. For manual control, you may directly change the network
configurations. |
| AI Operations |
Dynamic vs Static Channel capability |
Automatic channel
optimization using background scanning: This feature allows IntentAI to
dynamically select the best channel for operation by continuously scanning the
wireless environment in the background to avoid interference and congestion. |
Apply the recommendation: IntentAI will activate background scanning and configure the auto channel
selection mode to background scan for this network. IntentAI will continuously
monitor these configurations.
|
| Manual and static channel
settings as configured for the network: This approach involves the network
administrator manually assigning specific channels to Wi-Fi access points in the
network, keeping these settings fixed unless changed manually, to maintain stable
and controlled network performance. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Network Efficiency vs Stability on 2.4 GHz radio |
Reduce background scan
interval for efficiency: Shortening the interval between background scans
helps the Wi-Fi network quickly adapt to changing interference and congestion,
potentially improving performance and responsiveness. |
Apply the recommendation: IntentAI will change the background scan interval allowing the network to swiftly
detect and react to interference, optimizing performance and ensuring a more
responsive and efficient Wi-Fi experience.
|
| Keep background interval
unchanged for stability: Maintaining the current interval for background scans
ensures consistent and predictable network behavior, minimizing the risk of
connectivity disruptions and maintaining stability. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Expanded Radar channels vs Limited Channel options |
Activate DFS for expanded
channel options and performance: Enabling Dynamic Frequency Selection (DFS)
opens up additional Wi-Fi channels in the 5 GHz band, which can reduce congestion
and improve overall network performance by utilizing less crowded frequencies. |
Apply the recommendation: IntentAI will enable DFS Radar channels for this network, allowing access to more
channels in the Wi-Fi network hence reducing congestion and enhancing Wi-Fi
performance by leveraging less crowded frequencies. IntentAI will continuously
monitor these configurations.
|
| Keep DFS off to avoid
interference and disruptions: Disabling DFS avoids potential interference with
radar systems and the associated disruptions, maintaining more predictable and
stable Wi-Fi operation without the need for radar detection and channel
switching. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Radar Interference vs Optimal Channel availability |
Turn off DFS to avoid radar
interference: Disabling Dynamic Frequency Selection (DFS) prevents potential
interference with radar systems, ensuring stable Wi-Fi operation without the
disruptions associated with radar detection and channel switching. |
Apply the recommendation: IntentAI will disable DFS Radar channels for this network, ensuring stable and
predictable Wi-Fi performance by avoiding interference with radar systems and
preventing the disruptions caused by mandatory channel switching. IntentAI will
continuously monitor these configurations.
|
| Keep DFS enabled for optimal
channel availability: Enabling DFS provides access to additional channels in
the 5 GHz band, reducing congestion and optimizing overall Wi-Fi performance by
using less crowded frequencies. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Client Performance vs Compatibility |
Enable band balancing for
optimized performance: Activating band balancing distributes devices across
different frequency bands (2.4 GHz and 5 GHz) to optimize network performance by
reducing congestion and improving load distribution. |
Apply the recommendation: IntentAI will enable band balancing for this network. This change will optimize
network performance by efficiently distributing devices across available frequency
bands, reducing congestion, and enhancing overall Wi-Fi experience. IntentAI will
continuously monitor these configurations.
|
| Keep band balancing disabled
to avoid compatibility issues: Disabling band balancing ensures that all
devices can connect to their preferred band without being forced to switch, which
can avoid potential compatibility problems with certain devices. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Distributed Wi-Fi Load vs Client Stability |
Enhance network performance
with load balancing: Implementing load balancing optimizes network performance
by evenly distributing client connections across access points, preventing
overloading on specific APs and ensuring efficient utilization of network
resources. |
Apply the recommendation: IntentAI will enable load balancing based on client count for this network. This
change will improve network performance by evenly distributing client connections,
preventing congestion on specific access points, and optimizing overall throughput
and reliability. IntentAI will continuously monitor these configurations.
|
| Maintain stability by
disabling load balancing: Disabling load balancing prioritizes network
stability over performance optimization, ensuring consistent connectivity and
reducing the risk of disruptions caused by frequent client reassignments. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Secure AP firmware vs Client Device Compatibility |
Upgrade for latest security
and features: Upgrading the network ensures it benefits from the latest
security patches and features, enhancing protection against cyber threats and
enabling access to new functionalities for improved performance. |
Apply the recommendation: IntentAI will upgrade the Zone firmware ensuring the network remains secure and
up-to-date with the latest features. This change will enhance protection against
cyber threats and enable access to new functionalities for improved performance
and management. IntentAI will continuously monitor these
configurations.
|
| Delay to avoid network
downtime and compatibility issues: Delaying upgrades prioritizes network
stability and compatibility, minimizing the risk of potential downtime and ensuring
existing devices continue to function without compatibility issues. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Client Distribution vs Compatibility |
Switch to proactive for
optimized client distribution: Transitioning to proactive client distribution
mode allows for more intelligent allocation of clients to access points, optimizing
network performance by balancing client load across APs. |
Apply the recommendation: IntentAI will change band balancing mode to Proactive for this network, this
change will optimize client distribution, enhancing overall network performance by
efficiently balancing client load across access points, which will improve
throughput and reduce congestion.
|
| Stay on basic for better
client compatibility: Remaining on basic mode prioritizes client
compatibility, ensuring seamless connectivity for a wide range of devices without
implementing advanced load balancing techniques. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| AI Operations |
Optimize for 5 GHz Radio vs Longer range with 2.4 GHz |
Optimize for 5 GHz, reduce
2.4 GHz power: This option prioritizes the 5 GHz band by decreasing the
transmit power of the 2.4 GHz band, aiming to improve overall network performance
and reliability by encouraging device connection to the less congested 5 GHz
band. |
Apply the recommendation: IntentAI will reduce 2.4 GHz power for this network. This change will enhance 5
GHz network performance by encouraging device connection to the less congested 5
GHz band, resulting in faster speeds and improved reliability for compatible
devices. IntentAI will continuously monitor these configurations.
|
| Preserve 2.4 GHz range, keep
power unchanged: This option maintains the transmit power of the 2.4 GHz band
to preserve its range and ensure broader coverage, prioritizing compatibility and
connectivity for devices that rely on the 2.4 GHz band. |
Do not apply the recommendation: IntentAI will maintain the existing
network configuration and will cease automated monitoring and change for this
Intent. For manual control, you may directly change the network configurations.
For automated monitoring and control, you can select the Resume action, after
which IntentAI will resume overseeing the network for this Intent.
|
| Energy Saving |
Energy Footprint vs Mission Criticality |
Reduction in energy footprint: Enable PowerSave mode for few access
points during off-peak hours to conserve energy. This approach may involve some
compromises, but overall service quality remains unaffected during these
periods. |
Leverage Energy Saving, available only through IntentAI for AI/ML based
Energy Saving Model for the network. In this mode, based on the usage pattern
PowerSave supported APs are switched to PowerSaving mode and resumed to normal
power based on the increased network activity.
|
| Operation of the mission critical network: Maintain all access points at
normal power continuously to ensure maximum reliability and performance for critical
applications, guaranteeing uninterrupted, high-quality connectivity essential for
mission-critical operations. |
This option will let all the APs work in normal power mode. |