`system`

Displays system information.

Syntax

system { enroll-device otp-number | reboot | reset | show serial }

Modes

Advanced mode

System mode

Parameters

enroll-device: Enroll the device certificate using OTP.
reboot: Reboot the system.
reset: Reset the system configuration to its default settings.

show serial: Displays the serial number.

otp-number: Enter the One Time Password (OTP) received through email or SMS.

Usage Guidelines

When the new RUCKUS Edge device is added, ACX will automatically send an OTP notification to your email or SMS. Before enrolling, go to the Connect Agent mode from the Advanced mode and enter the reachable DRS server domain name.

show serial is available in the advanced mode also under the show command

The following example shows how to enter the DRS server domain name before enrolling a device.

SmartEdge# connect-agent
(connect-agent)# set drs-address drsqa.ruckuswireless.com
Set DRS address (drsqa.ruckuswireless.com) successfully.

SmartEdge# system
(system)# enroll-device YLM453
Successfully enrolled device certificate.

SmartEdge# system
(system)# show serial
Device Serial: 964ACA206E07F41123240000C29488571

History

Release version	Command history
1.0.0	This command was introduced.

Basic Mode commands

system

`system`