set resource-manager configuration

Sets the resource manager configuration.
Syntax
set resource-manager configuration {data-plane cpu cpu-num | default}
Command Default

Resouce manager configuration is not set.

Parameters
data-plane cpu cpu-num
Configures the CPU settings for the dataplane of the device.
default
Sets resource-manager all resource back to default configuration.
Modes

Resource manager configuration mode

Usage Guidelines

This command is supported only on RUCKUS Edge.

Examples

The following example configures the dataplane CPU. 

Network# resource-manager
(resource-manager)# set data-plane cpu configuration
Setting these configurations might cause network disconnection. Do you want to proceed?
(y/N)
History
Release version Command history
1.0.0 This command was introduced.
Parent topic: Basic Mode Commands