show

Displays the system information.

Syntax

show [ internal-network ip-address | license | manager status | serial | version ]

Modes

Basic mode

Advanced mode

internal-network: Retrieves the current internal network setting.
ip-address: Specify the IP address.

license: Displays the license information.

manager status: Displays the connection status.

serial: Displays the serial number.
version: Displays the version number of the operating system.

Modes

Basic mode

Advanced mode

Usage Guidelines

Any usage guidelines?

The following example shows sample output for the

show manager
               status

command.

Examples

SmartEdge# show manager status
=================================== network ====================================
port1 (LAN/up): 00:0c:29:48:85:71 10.12.13.17/24
port2 (LAN/up): 00:0c:29:48:85:7b 10.12.15.17/24
port3 (WAN/up): 00:0c:29:48:85:85 10.176.154.17/25
Default Gateway: 10.176.154.1
DNS Server: 8.8.8.8

================================ connect-agent =================================
----- Ruckus One information -----
Edge is not managed by Ruckus One
Connection agent state:  SETUP
Status:  SmartEdge cannot get controller list.
Please check your SmartEdge entry setting.
Nats Leaf status: OFFLINE
Server List:
DRS default URL:  registrar.ruckuswireless.com
----------------------------------

The following example shows sample output for the

show
                  serial

command.

SmartEdge# show serial
Device Serial: 964ACA206E07F411EF84A0000C29488571

The following example shows sample output for the show internal-network command.

SmartEdge# show internal-network
Internal Network: 10.128.0.0/16

History

Release version	Command history
1.0.0	This command was introduced.

Basic Mode commands

show