`set interface IP address`

Configures the IP address settings for the interface.

Syntax

set interface ip
                  					address

[del] ipv4-address/mask gateway

Command Default

The interface IP is not configured

Parameters

del: Deletes the specified IPv4 address.
ipv4-address/mask: Specifies the IPv4 address and subnet mask for the interface.
gateway: Specifies the default gateway address.

Modes

Network configuration mode

Usage Guidelines

This command is supported only on RUCKUS Edge.

Examples

The following example configures the IP address settings for the interface.

Edge# network
Network# set interface ip address port1 192.168.1.100/24 192.168.1.1

History

Release version	Command history
1.0.0	This command was introduced.

set interface IP address