`ping`

Checks reachability of the device to the Internet or network manager such as RUCKUS One.

Syntax

ping {ip-address | domain} [ source interface ][ size datasize ] [ repeat count] [verbose ]

Parameters

ip-address: Specifies the IPv4 address.
domain: Specifies the domain name.
source interface: Specifies the source interface be used as the origin of the ping packets.
size datasize: Specifies the data size of the packet. The valid range is from 18 through 1500.
repeat count: Specifies the number of ping packets to sends.
verbose: Enables verbose output, which includes the time it took for each ping packet to be sent and received, and the packet loss percentage.

Modes

Network configuration mode

Usage Guidelines

Examples

The following example checks if the device is accessible on the network.

Edge# network
Network# ping 192.168.1.1
Sending 1, 16-byte ICMP Echo to 192.168.1.1, timeout 5000 msec, TTL 64
Type Control-c to abort
Reply from 192.168.1.1 : bytes=16 time=2ms TTL=64
Success rate is 100 percent (1/1), round-trip min/avg/max=2/2/2 ms.

History

Release version	Command history
1.0.0	This command was introduced.

Basic Mode commands

ping

`ping`