`create lag`

Creates a Link Aggregation Group (LAG) by specifying a unique LAG ID.

Syntax

create lag id [ static | dynamic ]

Command Default

If the aggregation mode is not specified, dynamic LAG is created by default.

Parameters

id: Specifies a unique identifier for the LAG. The value ranges from 0 through 4.
Please verify the range. Network# create lag id Error[strconv.Atoi: parsing "id": invalid syntax]: lag ID should be integer and less than 4 Network# create lag 5 Error: Lag Id should be from [0 - 4] Network#
static: Configures a static LAG, where interfaces are manually aggregated without using the Link Aggregation Control Protocol (LACP).
dynamic: Configures a dynamic LAG, which uses the Link Aggregation Control Protocol (LACP) to automatically aggregate interfaces.

Modes

Network mode

Usage Guidelines

Each LAG interface requires at least one physical interface as a member link. For more information on adding a member port, refer to lag add

Examples

The following example configures a static LAG.

SmartEdge# network
Network # create lag 2 static

The following example configures a dynamic LAG.

SmartEdge# network
Network # create lag 3

History

Release version	Command history
1.0.0	This command was introduced.

create lag