Firewall Ports that Must Be Open for Communications

Caution: The tasks described in this chapter should be undertaken only by an experienced network administrator or under the guidance of your service provider or technical support professional.

Depending on how your network is designed, you may need to edit the iptables file and open communication ports on any firewalls located between Unleashed Multi-Site Manager and Ruckus devices. Refer to the following URLs which include information about how to edit the iptables file:

The following table lists the ports that need to be open for different types of communications.

Firewall Ports That Must Be Open for Unleashed Multi-Site Manager Communications

Communication Ports
ZoneDirector and Unleashed (Device)
HTTPS TCP destination port 443
HTTP TCP destination port 80
SSH TCP destination port 22
SSH Tunnel (nginx) TCP destination port 9443

Note: If Unleashed Multi-Site Manager is behind the NAT server, you must map the TCP 22, 80, 443, and 9443 ports to the Unleashed Multi-Site Manager server

Note: For ZoneDirector and Unleashed 200.5 devices, port 80 is used to download the configuration file from Unleashed Multi-Site Manager. Therefore, ensure port 80 is open in the firewall; otherwise, the restore task will continue to display the status as Applying.
Note: Ensure port 443 is open in the firewall when Unleashed Multi-Site Manager manages ICX switches, because switches register to the application through port 443 and this port is not configurable on the switch.