Editing the Device Properties

You can edit a device’s tag name, location, GPS coordinates and Web port mapping.
  1. After you to log in to the Web interface, select Devices from the menu in the left.
    The Devices page appears listing all the devices managed by the software.
  2. From the list of devices, select the device for which you want to edit the propertied, then click Edit.
    The Edit dialog box appears.

    Edit Dialog Box

  3. Modify the following configuration settings:
    • Tag: Type the device tag name.
    • Location: Type the location of the device.
    • GPS Coordinates (Latitude and Longitude): the software uses these to position the device icon on the map.
    • Web Port Mapping: The port number after the IP address indicates the protocol that you can use to gain access to the device’s Web interface. Default port number is 433 for HTTPS protocol.
      Note: 200.6 and later Unleashed networks versions setup SSH tunnels between Unleashed Multi-Site Manager and it self, so you do not have to configure the Web Port Mapping.
  4. Click Save.
    A success message is displayed after the device properties are saved.
  5. Click OK.
    The new configuration changes for the device are saved and refreshed in the table.