The web UI displays the traffic
statistics for all tunnels of the same type in a table and a corresponding line
chart. The
table shows detailed numerical data for transmitted, received, dropped, and error
data
calculated by packets and bytes. The line chart provides a visual representation
of the same
data. The two representations are synchronized and controlled by the search
criteria.
Note: For performance reasons, the total counters per DP or AP for
each bin may be pre-calculated.
Complete the following steps to view the
tunnel statistics for the different tunnel types:
In the controller web UI, select Monitor > Report > Ruckus AP Tunnel
Stats.
The
Ruckus GRE tab appears by default.
Reviewing AP Tunnel Statistics
Select the tunnel type of your interest by
clicking the corresponding tab. Choose one of the following:
Indicate the time period for which you want to
view the report
Move the slider to set the duration
Data
Plane
Indicates the Data Plane (available when Ruckus
GRE or Ruckus GRE + IPsec option is selected)
Select a Data Plane from the drop-down
menu
Gateway Address
Indicates the IP address of the third-party gateway
terminating the AP tunnel (available when SoftGRE
or SoftGRE +
IPsec option is selected)
Enter the gateway's IP address
AP MAC or IP Address
(Optional) Indicates the MAC of the Access Point
or IP Address
Enter the AP MAC or IP address to display
Zone Name
Specifies the Zone for which you want to view the
report
Select the Zone from the drop-down menu
Click one of the following:
Load Data: To view
the report in the workspace.
Export CSV: To open
or save the report in CSV file format.
According to your choice, the
data is loaded in the web UI (displaying both a line chart and a table with the
tunnel statistics measured in bytes and packets per second) or exported to a
CSV
file (displaying only the tunnel statistics measured in bytes and packets per
second).
AP Tunnel Report Attributes explains the
content of the report based on the statistics received for RUCKUS GRE. Each entry
contains the 15-minute cumulative data.
AP Tunnel Report Attributes
Attribute
Description
Time
Date and time (Bin ID), which is stamped at a 15-minute interval. For
example, 10:00, 10:15
TX Bytes
Indicates the number of bytes sent from the AP
RX Bytes
Indicates the number of bytes received by the AP
TX Packets
Indicates the number of packets sent from the AP
RX Packets
Indicates the number of packets received by the AP
Dropped Packets
(Only present for RuckusGRE and RuckusGRE + IPsec tunnel type) Indicates
the number of packets dropped
TX Dropped Packets
(Only present for SoftGRE and SoftGRE + IPsec tunnel type) Indicates
the number of dropped packets transmitted
RX Dropped Packets
(Only present for SoftGRE and SoftGRE + IPsec tunnel type) Indicates
the number of dropped packets received
TX Error Packets
(Only present for SoftGRE tunnel type) Indicates the number of error
packets transmitted
RX Error Packets
(Only present for SoftGRE tunnel type) Indicates the number of error
packets received