Configuring Packet Capture for APs

5.0 Update
User can enable packet streaming feature on both wired and wireless interfaces on specified APs using web UI. You must enable this feature on a per-AP basis. It allows multiple users to execute AP packet capturing, but only a single AP can execute one capturing task at a time. For a single user can capture tasks in multiple APs, but batch operation is not allowed. Only users with full access permission can execute AP packet capturing.

To configure Packet Capture:

  1. From the Network > Wireless > Wireless LANs page, select an AP.
  2. Click More and select Packet Capture.
    The Packet Capture dialog box appears.
  3. Configure the Capture Mode:
    • Stream to Wireshark
      • Capture Interface Select the required wireless or wired interface
        • For 2.4 GHz/5 GHz, update the following details:

          Wireshark station IP: Enter the IP address.

          MAC Address Filter: Enter the MAC address.

          Frame Type Filter: Click the required options from Management, Control, and Data.

        • For Wired Interface, update the following details:

          Wireshark station IP: Enter the IP address.

          LAN Port: Choose the LAN port.

    • Save to file
      • Capture Interface Select the required wireless or wired interface
        • For 2.4 GHz/5 GHz, update the following details:

          MAC Address Filter: Enter the MAC address.

          Frame Type Filter: Click the required options from Management, Control, and Data.

        • For Wired Interface, update the following details:

          MAC Address Filter: Enter the MAC address.

          LAN Port: Choose the LAN port.

  4. Click Start.