Verifying a Multi-VRF Configuration
The following examples illustrate the
use of a variety of
show commands that are useful in verifying Multi-VRF
configurations. To verify all configured VRFs in summary mode, enter the
show vrf command, as in the following example.
device# show vrf Total number of VRFs configured: 2 Status Codes - A:active, D:pending deletion, I:inactive Name Default RD vrf|v4|v6 Routes Interfaces green 1:1 A | A| A 12 ve111 ve211 ve311* red 10:12 A | A| A 4 ve1117 port-id tn1* Total number of IPv4 unicast route for all non-default VRF is 8 Total number of IPv6 unicast route for all non-default VRF is 8
To verify a specific VRF in detail mode, enter
the show vrf
vrf-name command, as in the following example.
device# show vrf green VRF green, default RD 1:1, Table ID 1 IP Router-Id: 1.1.1.1 Interfaces: ve111 ve211 ve311 ve1116 ve2115 Address Family IPv4 Max Routes: 5500 Number of Unicast Routes: 6 Address Family IPv6 Max Routes: 400 Number of Unicast Routes: 6
To verify all configured VRFs in detail mode, enter the
show vrf detail
command, as in the following example.
device# show vrf detail Total number of VRFs configured: 2 VRF green, default RD 1:1, Table ID 1 IP Router-Id: 1.1.1.1 Interfaces: Use "show vrf green" to see the list of interfaces Address Family IPv4 Max Routes: 5500 Number of Unicast Routes: 6 Address Family IPv6 Max Routes: 400 Number of Unicast Routes: 6 VRF red, default RD 10:12, Table ID 2 IP Router-Id: 1.1.17.1 Interfaces: Use "show vrf red" to see the list of interfaces Address Family IPv4 Max Routes: 300 Number of Unicast Routes: 2 Address Family IPv6 Max Routes: 70 Number of Unicast Routes: 2 Total number of IPv4 unicast route for all non-default VRF is 8 Total number of IPv6 unicast route for all non-default VRF is 8