Changing the Maximum Number of ARP Table Entries

ARP table entries, including dynamic, static, and pending ARP entries, can be increased on a RUCKUS Layer 3 switch.

Note: Default and maximum ARP table entries differ based on the platform. Refer to the system-max ip-arp command in the RUCKUS FastIron Command Reference for more information.

Note: When the maximum number of ARP table entries is changed, the maximum number of IP cache entries is set to the same value.

Enter global configuration mode.
```
device# configure terminal
```

Enter the following command and specify the maximum number of ARP table entries.
```
device(config)# system-max ip-arp 32000
```

Save the running configuration to the startup configuration file.
```
device(config)# write memory
```

Exit from global configuration mode.
```
device(config)# end
```

Reload the software after changing the ARP table size to place the change into effect.
```
device(config)# reload
```

The following example configures the system max for ARP table entries.

device# configure terminal
device(config)# system-max ip-arp 32000
device(config)# write memory
device(config)# end
device# reload

RUCKUS FastIron Layer 3 Routing Configuration Guide, 09.0.10 53-1005722-17

Changing the Maximum Number of ARP Table Entries