Displaying RIP Information

To display RIP filters, enter the following command at any CLI level. 

device# show ip rip
RIP Summary
  Default port 520
      Administrative distance is 120
      Updates every 30 seconds, expire after 180
      Holddown lasts 180 seconds, garbage collect after 120
      Last broadcast  29, Next Update 27
      Need trigger update  0, Next trigger broadcast 1
      Minimum update  interval 25, Max update Offset 5
      Split horizon is on; poison reverse is off
      Import metric 1 
      Prefix List, Inbound : block_223
      Prefix List, Outbound : block_223
      Route-map, Inbound : Not set
      Route-map, Outbound : Not set
      Redistribute: CONNECTED  Metric : 0  Routemap : Not Set 
                    
  No Neighbors are configured in RIP Neighbor Filter Table

To display RIP filters for a specific interface, enter the following command. 

device# show ip rip interface ethernet 1/1/1
Interface e 1/1/1
RIP Mode : Version2 Running: TRUE 
 Route summarization disabled
Split horizon is on; poison reverse is off
Default routes not accepted
Metric-offset, Inbound 1
Metric-offset, Outbound 0
Prefix List, Inbound : Not set
      Prefix List, Outbound : Not set
Route-map, Inbound : Not set
Route-map, Outbound : Not set
RIP Sent/Receive packet statistics:
    Sent : Request 2 Response 34047
    Received : Total 123473 Request 1 Response 123472 UnRecognised 0
RIP Error packet statistics:
    Rejected 0  Version 0 RespFormat 0 AddrFamily 0
    Metric 0 ReqFormat 0

To display RIP route information, enter the following command. 

device# show ip rip route
RIP Routing Table - 474 entries:
1.1.1.1/32, from 169.254.30.1, e 1/1/23   (820)
          RIP, metric 4, tag 0, timers: aging 13
1.1.2.1/32, from 169.254.50.1, e 1/3/1   (482)
          RIP, metric 3, tag 0, timers: aging 42
1.1.6.1/32, from 169.254.100.1, ve 101    (413)
          RIP, metric 2, tag 0, timers: aging 42
169.254.40.0/24, from 192.168.1.2, e 1/1/1   (1894)
          RIP, metric 3, tag 0, timers: aging 14
169.254.50.0/24, from 192.168.1.2, e 1/1/1   (1895)
          RIP, metric 4, tag 0, timers: aging 14
169.254.100.0/24, from 192.168.1.2, e 1/1/1   (2040)
          RIP, metric 2, tag 0, timers: aging 14
169.254.101.0/30, from 192.168.1.2, e 1/1/1   (2105)
223.229.32.0/31, from 169.254.50.1, e 1/3/1   (818)
          RIP, metric 2, tag 0, timers: aging 21

To display current running configuration for interface 1/1/1, enter the following command. 

device# show running-config interface ethernet 1/1/1
interface ethernet 1/1/1
 enable
 ip ospf area 0
 ip ospf priority 0
 ip rip v2-only
 ip address 10.1.1.2/24
 ipv6 address 2000::1/32
 ipv6 enable
!

To display current running configuration for ve 10, enter the following command. 

device# show running-config interface ve 10 
interface ve 10
 ip ospf area 2
 ip rip v1-compatible-v2
 ip rip poison-reverse
 ip address 10.1.0.1/24
 ipv6 address 2001:db8:1::14/64
!

To display current running configuration for ve 20, enter the following command. 

device# show running-config interface ve 20
interface ve 20
 ip ospf area 1
 ip rip v1-only
 ip rip poison-reverse
 ip address 10.2.0.1/24
!
Parent topic: RIP