IPv6 CLI Command Support

IPv6 CLI Command Support

IPv6 Command

Description

Switch Code

Router Code

clear ipv6 cache

Deletes all entries in the dynamic host cache.

X

clear ipv6 mld-snooping

Deletes MLD-snooping-related counters or cache entries.

X

X

clear ipv6 neighbor

Deletes all dynamic entries in the IPv6 neighbor table.

X

X

clear ipv6 ospf

Clears OSPF-related entries.

X

clear ipv6 rip

Clears RIP-related entries.

X

clear ipv6 route

Deletes all dynamic entries in the IPv6 route table.

X

clear ipv6 traffic

Resets all IPv6 packet counters.

X

X

clear ipv6 tunnel

Clears statistics for IPv6 tunnels.

X

copy tftp

Downloads a copy of a RUCKUS software image from a TFTP server into the system flash memory using IPv6.

X

X

debug ipv6

Displays IPv6 debug information.

X

X

ipv6 access-class

Configures access control for IPv6 management traffic.

X

X

ipv6 access-group

Applies an IPv6 ACL to an interface.

X

X

ipv6 access-list

Configures an IPv6 access control list for IPv6 access control.

X

X

ipv6 address

Configures an IPv6 address on an interface (router) or globally (switch).

X

X

ipv6 debug

Enables IPv6 debugging.

X

X

ipv6 dns server-address

Configures an IPv6 DNS server address.

X

X

ipv6 enable

Enables IPv6 on an interface.

X

X

ipv6 hop-limit

Sets the IPv6 hop limit.

X

ipv6 icmp

Configures IPv6 ICMP parameters.

X

ipv6 load-sharing

Enables IPv6 load sharing.

X

ipv6 mld-snooping

Configures MLD snooping.

X

X

ipv6 mtu

Configures the maximum length of an IPv6 packet that can be transmitted on a particular interface.

X

ipv6 nd

Configures neighbor discovery.

X

ipv6 nd stale-time

Configures the STALE state timeout for IPv6 neighbors on an interface.

X

ipv6 neighbor

Maps a static IPv6 address to a MAC address in the IPv6 neighbor table.

X

ipv6 ospf

Configures OSPFv3 parameters on an interface.

X

ipv6 prefix-list

Builds an IPv6 prefix list.

X

ipv6 redirects

Enables the sending of ICMP redirect messages on an interface.

X

ipv6 rip

Configures RIPng parameters on an interface.

X

ipv6 route

Configures an IPv6 static route.

X

ipv6 router

Enables an IPv6 routing protocol.

X

ipv6 unicast-routing

Enables IPv6 unicast routing.

X

log host ipv6

Configures the IPv6 syslog server.

X

X

ping ipv6

Performs an ICMP for IPv6 echo test.

X

X

show ipv6

Displays some global IPv6 parameters, such as the IPv6 DNS server address.

X

X

show ipv6 access-list

Displays configured IPv6 access control lists.

X

X

show ipv6 cache

Displays the IPv6 host cache.

X

show ipv6 interface

Displays IPv6 information for an interface.

X

show ipv6 mld-snooping

Displays information about MLD snooping.

X

X

show ipv6 neighbor

Displays the IPv6 neighbor table.

X

X

show ipv6 ospf

Displays information about OSPFv3.

X

show ipv6 prefix-lists

Displays the configured IPv6 prefix lists.

X

show ipv6 rip

Displays information about RIPng.

X

show ipv6 route

Displays IPv6 routes.

X

show ipv6 router

Displays IPv6 local routers.

X

show ipv6 tcp

Displays information about IPv6 TCP sessions.

X

X

show ipv6 traffic

Displays IPv6 packet counters.

X

X

show ipv6 tunnel

Displays information about IPv6 tunnelss

X

X

snmp-client ipv6

Restricts SNMP access to a certain IPv6 node.

X

X

snmp-server host ipv6

Specifies the recipient of SNMP notifications.

X

X

system-max ip6-cache

Configures the maximum number of IPv6 cache entries for ICX 7850 devices.

X

system-max ip6-neighbor

Configures the maximum number of IPv6 neighbors for ICX 7850 devices.

X

telnet

Enables a Telnet connection from the RUCKUS device to a remote IPv6 host using the console.

X

X

traceroute ipv6

Traces a path from the RUCKUS device to an IPv6 host.

X

X

web access-group ipv6

Restricts Web management access to certain IPv6 hosts as determined by IPv6 ACLs.

X

X

web client ipv6

Restricts Web management access to certain IPv6 hosts.

X

X