Displaying information on IPv6 static routes

You can consult the IPv6 route table for information on connected, static, and protocol routes.
To display information on IPv6 static routes, use the following commands.
  1. To check whether IPv6 is enabled, enter the show ipv6 command. The command can be entered at the device prompt or in global or interface configuration mode. 
    device# show ipv6
Global Settings
  IPv6 Router-Id: 1.1.1.1   load-sharing path: 4
  unicast-routing enabled, ipv6  allowed to run, hop-limit 64
  reverse-path-check disabled
  nd6 proxy disabled
  host drop cam limit disabled
  urpf-exclude-default disabled
  session-logging-age 5
  selective-routes-download enabled
  No Inbound Access List Set
  No Outbound Access List Set
  source-route disabled, forward-source-route disabled, icmp-redirect disabled  icmp-mpls-response enabled
OSPF (default VRF): enabled
    This example shows IPv6 is enabled on the device.
  2. To display the IPv6 route table information, enter the show ipv6 route command. 
    device# show ipv6 route
IPv6 Routing Table - 7 entries:
Type Codes: C - Connected, S - Static, R - RIP, O - OSPF, B - BGP
OSPF Sub Type Codes: O - Intra, Oi - Inter, O1 - Type1 external, O2 - Type2 external
Type     IPv6 Prefix         Next Hop Router          Interface           Dis/Metric
C        2000:4::/64         ::                       ethe 1/3/2          0/0
S        2001:DB8::/16       ::                       tunnel 6            1/1
S        2001:DB8:1234::/32  ::                       tunnel 6            1/1
C        2001:DB8:46a::/64   ::                       ethe 1/3/2          0/0
C        2001:DB8::1/128     ::                       loopback 2          0/0
O        2001:DB8::2/128     fe80::2e0:52ff:fe91:bb37 ethe 1/3/2          110/1
C        2001:DB8::/64       ::                       tunnel 2            0/0
    As shown in the example, connected, static, RIP, OSPF, and BGP routes are listed, along with the destination address, the next hop router, the interface used toward the destination, and the administrative distance and cost for each route.
Parent topic: IPv6 Static Routing